Worm Gear Box

Elecon Worm Gears

We come with a highly advanced Elecon Worm Gears that is widely considered for its shunting speed among our clients. Provided with a bogie drive arrangement, it helps stacking the lime stone. Used at two different speeds, the entire range of the special worm gears offered by us is known for its smooth operation. This offered worm gear is further known for its long functional life.

Shunting speed (High speed): This is achieved through an A.C. Motor which drives worm gear unit through coupling (on RH side).

 

Reclaiming speed(Low speed): This is achieved through D.C. Motor which is driven Helical gear box and driving worm gear unit (on LH side).


Additional Information:
  • Item Code: Boggie-Drive-Unit

Conveyor Track Drive Gear Unit

We stock and offer Conveyor Track Drive Track Drive Gear Unit that is widely used in the automation assembly. Easy to be installed and to be maintained, these gears are highly acclaimed among our revered client-base. In addition to this, the range of special worm gears offered by us is known for its low noise operation and auto electronic power steering system as well.


Technical Specifications:

 

1st Stage worm pair
c.d. = 5"
2nd Stage helical pair
c.d. = 200 mm.
Total ratio
9.67/1 5.533/1 53.504/1
30/01/11 5.375/1 161.25/1
60/1 5.375/1 322.5/1

Special Worm Gears

With an experience in the domain, we are capable of offering a qualitative range of Special Worm Gears, which is highly demanded in the market. These gears offer a direct but soft application of the steering input. The range of the worm gears offered by us is known for its anti-corrosive properties and durability. These offered worm gears are further known for their straight line stability.

Specification of Gear box (Type - 1):

  • Dia 500 roll adjustment gear unit for: Posiion P1 and P2.
  • 1st stage center distance: 200 mm, ratio 40/1.
  • 2nd stage center distance: 297 mm, ratio 32/1 (2 nos.).
  • Total ratio: 1280/1.
  • Output torque for 1 anchor: 30.3 K-Nm.
  • Material: cast steel.

Specification of Gear box (Type - 2):

  • Dia 630 roll adjustment gear unit for postion P1 and P2
  • 1st stage center distance: 250 mm, ratio 40/1.
  • 2nd stage center distance: 340 mm, ratio 32/1. (2 nos.)
  • Total ratio: 1280/1.
  • Output torque for 1 anchor: 58 K-Nm.
  • Material: Cast steel

Special Worm Gears

We are widely regarded for supplying a high quality Special Worm Gears that are highly acclaimed for its longer functional life among the customers we have. Known for their durability and fine finish, these gears are widely applauded among the clientele we hold. To cater to the diverse requirements and demands of our customers, we make the range of special worm gears offered by us is available in two different sizes.

 

Features:


  • Elecon Special Worm Gears : Higher Center Distance Worm Gear Unit
  • Elecon has developed above 17" center distance gear unit in the size 24" & 28" for special purpose applications.
  • 24" size is developed in underdriven mounting position used for opening heavy duty gate on water dam.
  • 28" size is developed in underdriven mounting position for double reduction gear unit(14/28) size for an application of Launching Pad Platforms used at ISRO SHAR Center, Sriharikota.

Additional Information:
  • Item Code: Elecon

Special Worm Gears

Relying on the credible vendors, we offer a qualitative range of Special Worm Gears, which is widely acknowledged among the clientele we hold. These three input gears are installed in series. Known for their hassle free operations, these gears are highly demanded in the market. Driven by a dedication to serve the client-satisfaction at prime, we assure an utmost quality of the whole range of worm gears offered by us.

Various detail of product:
Feature Single Worm Shaft & two worm whhel and two out put shaft
Advantages Gear boxes with better performance in a continuous operation.
Technical Specification The Models with minimum 3Kw to 125Kw Transmitting capacity in ratio Ranging from 5/1 to 70/1
Product Application Tubemills for Non-ferrous Steel
Range 3" to 14" Center Distance, Ratio 5/1 to 70/1

Rotomotive Power Drive

We stock and offer Rotomotive Power Drive that is equipped with breather plugs and a full set of filler. Offering a mechanical resistance to the axial loads, it is highly demanded among the clients we have. The entire range of rotomotives offered by us is known for offering a noise free operation. This offered equipment is further provided with the paint coat that protects the housing from oxidation.


Features:


  • The gear unit is equipped with a full set of filler, level and breather plugs, permitting all mounting positions and facilitating the management of the stock.
  • The housing shape has been studied to optimize the water draining during washing.
  • From type 63 and up, 2 taper roller bearings are mounted on the wormshaft, improving the mechanical resistance to the axial loads given by the wormwheel.
  • Moreover, the combination of this characteristic and 2 nilos (mounted on the unit sizes 75 up to 110 to keep lubrication grease inside the bearings even when they are not touched by the oil bath), permits the mounting of the whole BOX range, from the size 25 to the size 110, in the positions V5 and V6 without any need of additional interventions.
  • In order to increase silence, efficiency and duration, the wormshaft is made in case hardened steel and ground machined, while the worm wheel is in shell cast bronze.
  • Before being assembled, the worm wheel is submitted to a running-in working period to improve the surface finishing and hardness.
  • Mating surfaces are machined for a perfect planarity.
  • The housing has been designed with parametric three-dimensional CAD SW supported by programs of analysis of the thermal dissipation capacity and the structural resistance/ deformation under the effect of working loads.
  • A paint coat cancels the negative effects of the aluminium porosity and protects the housing from oxidation.

Specifications:

  • Box units sizes: 25 to 90 mm
  • Material: Cast iron

 


Additional Information:
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P
  • Port of Dispatch: Nhavasheva
Looking for Worm Gear Box ?
© Aman International
 
Desktop Site Back to top